Electrical segments:
Interior
Exterior
Emt Conduit and Fittings
EMT Conduit Pipe HDG UL797
Material | Steel Q19 5 |
Finish | Hot dip galvanized |
Standard | UL 797 / ANSI C80.3 |
Thread | No Thread |
Size | 1/2″ to 4″ |
Usage | Used for both exposed and concealed work,use above ground for lighting circuits, and control lines and other low power applications |
Steel Q195
Product Details
Emt Conduit and Fittings
EMT Conduit Pipe ANSI C80.3
|
Material
|
Steel Q195 |
|
Finish
|
Pre-galvanized |
|
Standard
|
ANSI C80.3 |
|
Size
|
1/2″ to 4″ |
|
Usage |
Can be used for both exposed and concealed work,use above ground for lighting circuits, and control lines and other low power |
Product Details
Emt Conduit and Fittings
EMT Conduit Pipe Thinner
Material | Steel Q195 |
Finish | Pre-galvanized |
Standard | Not Standard |
Size | 1/2″ to 4″ |
Usage | Can be used for both exposed and concealed work,use above ground for lighting circuits, and control lines and other low power |
Product Details
Emt Conduit and Fittings
EMT 90 Degree Elbow,PG
Material | Steel Q195 |
Finish | Pre-galvanized |
Standard | ANSI C80.3 |
Thread | No threaded |
Size | 1/2″ to 4″ |
Usage | Used to connect EMT Conduit together to allow for 90 degree bends |
Product Details
Emt Conduit and Fittings
EMT 90 Degree Elbow,HDG
|
Material
|
Steel Q195 |
|
Finish
|
Hot dip galvanized |
| Standard | UL 797 |
| Thread | No threaded |
|
Size
|
1/2″ to 4″ |
|
Usage
|
Used to connect EMT Conduit together to allow for 90 degree bends |
Product Details
Emt Conduit and Fittings
EMT 90 Degree Short Elbow
|
Material |
Steel Q195 |
|
Finish |
Pre-galvanized |
| Standard | ANSI C80.3 |
| Thread | No threaded |
|
Size |
1/2″ 3/4″ 1″ |
|
Usage |
Used to connect EMT Conduit together to allow for 90 degree bends |
Product Details
1/2″ | Pre-galvanized |
3/4″ | Pre-galvanized |
1″ | Pre-galvanized |
Emt Conduit and Fittings
EMT Set Screw Coupling,Zinc Steel
|
Material
|
Zinc Die Cast |
|
Finish
|
Galvanized |
|
Type
|
Un-insulated |
|
Standard
|
UL 514B |
|
Thread
|
NPT |
|
Size
|
1/2″ to 4″ |
|
Usage
|
Used to join one length of EMT Pipe to knock-out in concrete-tight box or dry location applications |
Emt Conduit and Fittings
EMT Set Screw Connector Insulated,Zinc
Material | Zinc Die Cast |
Finish | Galvanized |
Type | Insulated |
Standard | UL 514B |
Thread | NPT |
Size | 1/2″ to 4″ |
Usage | Used to join one length of EMT Pipe to knock-out in concrete-tight box or dry location applications |
Emt Conduit and Fittings
EMT Set Screw Connector,Steel
|
Material
|
Steel |
|
Finish
|
Galvanized |
|
Type
|
Un-insulated |
|
Standard
|
UL 514B |
|
Type
|
NPT |
|
Size
|
1/2″ to 4″ |
|
Usage
|
Used to join Electrical Metallic Tubing to knock-outs in concrete-tight box or dry location applications |
Product Details
Emt Conduit and Fittings
EMT Set Screw Connector Insulated, Steel
|
Material
|
Steel |
|
Finish
|
Galvanized |
|
Type
|
Insulated |
|
Standard
|
UL 514B |
|
Thread
|
NPT |
|
Size
|
1/2″ to 4″ |
|
Usage
|
Used to join Electrical Metallic Tubing to knock-outs in concrete-tight box or dry location |
Emt Conduit and Fittings
EMT Set Screw Coupling,Steel
Material | Steel |
Finish | Galvanized |
Standard | UL 514B |
Thread | NPT |
Size | 1/2″ to 4″ |
Usage | Used to join two length of Electrical Metallic Tubing |
Product Details
Emt Conduit and Fittings
EMT Compression Connector,Zinc
|
Material
|
Zinc Die Cast |
|
Finish
|
Galvanized |
|
Type
|
Un-insulated |
|
Standard
|
UL 514B |
|
Thread
|
NPT |
|
Size
|
1/2″ to 2″ |
|
Usage
|
Used to join Electrical Metallic Tubing to knock-outs in concrete-tight box or damp location applications |
Product Details
Emt Conduit and Fittings
EMT Compression Coupling,Zinc
|
Material
|
Zinc Die Cast |
|
Finish
|
Galvanized |
|
Standard
|
UL 514B |
|
Thread
|
NPT |
|
Size
|
1/2″ to 2″ |
|
Usage
|
Used to join two length of Electrical Metallic Tubing |
Product Details
Emt Conduit and Fittings
EMT Compression Connector,Steel
Material | Steel |
Finish | Galvanized |
Type | Un-insulated or Insulated |
Standard | UL 514B |
Thread | NPT |
Size | 1/2″ to 4″ |
Usage | Used to join Electrical Metallic Tubing to knock-outs in concrete-tight box or dry location applications |
Product Details
Emt Conduit and Fittings
EMT Compression Insulated Connector,Steel
Material | Steel |
Finish | Galvanized |
Type | Insulated |
Standard | UL 514B |
Thread | NPT |
Size | 1/2″ to 4″ |
Usage | Used to join Electrical Metallic Tubing to knock-outs in concrete-tight box or dry location |
Product Details
Emt Conduit and Fittings
EMT Compression Coupling,Steel
Material | Steel |
Finish | Galvanized |
Standard | UL 514B |
Size | 1/2″ to 4″ |
Usage | Used to join two length of Electrical Metallic Tubing |
Product Details
Emt Conduit and Fittings
EMT Set Screw Connector,Aluminum
|
Material
|
Aluminum |
|
Type
|
Un-insulated |
|
Standard
|
UL 514B |
|
Thread
|
NPT |
|
Size
|
1/2″ to 2″ |
|
Usage
|
Used to join Electrical Metallic Tubing to knock-outs in concrete-tight box or dry location |
Product Details
Emt Conduit and Fittings
EMT Set Screw Coupling,Aluminum
|
Material
|
Aluminum |
|
Type
|
Un-insulated |
|
Standard
|
UL 514B |
|
Thread
|
NPT |
|
Size
|
1/2″ to 2″ |
|
Usage
|
Used to join two length of Electrical Metallic Tubing |
Product Details
Emt Conduit and Fittings
EMT Conduit Bushing
|
Material
|
Zinc Die Cast |
| Finish | Galvanized |
| Type | Un-insulated |
| Standard | UL 514B |
| Thread | NPT |
| Size | 1/2″ to 4″ |
|
Usage
|
Use with locknut to terminate threaded Rigid or IMC Conduti to an outlet box. |
Product Details
Emt Conduit and Fittings
Conduit Bushing Insulated
|
Material
|
Zinc Die Cast |
| Finish | Galvanized |
| Type | Insulated |
| Standard | UL 514B |
| Thread | NPSL |
| Size | 1/2″ to 4″ |
|
Usage
|
Use with locknut to terminate threaded Rigid or IMC Conduti to an outlet box |
Product Details
Emt Conduit and Fittings
Conduit Bushing Insulated
|
Material
|
Zinc Die Cast |
| Finish | Galvanized |
| Type | Insulated |
| Standard | UL 514B |
| Thread | NPSL |
| Size | 1/2″ to 4″ |
|
Usage
|
Use with locknut to terminate threaded Rigid or IMC Conduti to an outlet box |
Product Details
Emt Conduit and Fittings
Grounding Bushing Insulated
Material | Malleable Iron |
| Finish | Galvanized |
| Type | Insulated |
| Standard | UL 514B |
| Thread | NPSL |
| Size | 1/2″ to 6″ |
Usage | Use with locknut to terminate threaded Rigid or IMC Conduti to an outlet box |
Product Details
Emt Conduit and Fittings
Zinc Grounding Bushing Insulated
Material | Zinc Die Cast |
| Finish | Galvanized |
| Type | Insulated |
| Standard | UL 514B |
| Thread | NPSL |
| Size | 1/2″ to 4″ |
Usage | Use with locknut to terminate threaded Rigid or IMC Conduti to an outlet box |
Product Details
* Trade size:
| 1/2″ | Zinc with Grounding |
| 3/4″ | Zinc with Grounding |
| 1″ | Zinc with Grounding |
| 1-1/4″ | Zinc with Grounding |
| 1-1/2″ | Zinc with Grounding |
| 2″ | Zinc with Grounding |
| 2-1/2″ | Zinc with Grounding |
| 3″ | Zinc with Grounding |
| 4″ | Zinc with Grounding |
Emt Conduit and Fittings
Plastic Bushing
|
Material
|
PVC |
| Standard | UL 514B |
| Thread | NPSL |
| Size | 1/2″ to 4″ |
|
Usage
|
Use on threaded Rigid or IMC conduit to protect the wires |
Product Details
Emt Conduit and Fittings
Insulated Bushing,Iron
Material | Malleable Iron |
| Finish | Galvanized |
| Type | Insulated |
| Standard | UL 514B |
| Thread | NPSL |
| Size | 1/2″ to 6″ |
Usage | Use on threaded Rigid or IMC conduit to protect the wires |
Product Details
Emt Conduit and Fittings
Stainless Steel Bushing
|
Material
|
Stainless Steel |
| Finish | SS304 / SS316 |
| Thread | NPSL |
| Size | 1/2″ to 6″ |
|
Usage
|
Use with locknut to terminate threaded Rigid or IMC Conduti to an outlet box. |
Product Details
|
1/2″ |
Stainless Steel |
|
3/4″ |
Stainless Steel
|
|
1″ |
Stainless Steel
|
|
1-1/4″ |
Stainless Steel
|
|
1-1/2″ |
Stainless Steel
|
|
2″ |
Stainless Steel
|
|
2-1/2″ |
Stainless Steel
|
|
3″ |
Stainless Steel
|
| 3-1/2″ | Stainless Steel |
| 4″ | Stainless Steel |
| 5″ |
Stainless Steel |
|
6″ |
Stainless Steel
|
Emt Conduit and Fittings
EMT to EMT Capped Corner Coupling
|
Material
|
Zinc Die Cast |
| Finish | Galvanized |
| Standard | UL 514B |
| Size | 1/2″ 3/4″ 1″ |
|
Usage
|
Use to facilitate pulling conductors through a 90 degree bend in a run of steel Electrical Metallic Tubing where it is essential to make tight turns within limited available space |
Product Details
Emt Conduit and Fittings
EMT Connector Set Screw 90 Degree
|
Material
|
Zinc Die Cast |
| Finish | Galvanized |
| Standard | UL514 B |
| Size | 3/4″ 1″ 1-1/4″ |
|
Usage
|
Use to facilitate pulling conductors through a 90 degree bend in a run of steel Electrical Metallic Tubing where it is essential to make tight turns within limited available space |
Product Details
Emt Conduit and Fittings
EMT to Flex Coupling
|
Material
|
Zinc Die Cast |
| Finish | Galvanized |
| Type | Un-insulated |
| Standard | UL 514B |
| Size | 1/2″ 3/4″ 1″ |
|
Usage
|
Used to provide a transition from Electrical Metallic Tubing to flexible metal conduit. Electrical Metallic Tubing side is set-screw and flex side is squeeze type |
Product Details
Emt Conduit and Fittings
EMT to EMT Pull Corner Elbow
Material | Zinc Die Cast |
| Finish | Galvanized |
| Type | Un-insulated |
| Standard | UL514 B |
| Size | 1/2″ 3/4″ 1″ |
Usage | Use to facilitate pulling wires through a 90 degree bend in a run of EMT Pipe,Removable cover gives ample access to wiring |
Product Details
Emt Conduit and Fittings
Pull Corner Elbow EMT to Box
|
Material
|
Zinc Die Cast |
| Finish | Galvanized |
| Type | Un-insulated |
| Standard | UL514 B |
| Size | 1/2″ 3/4″ 1″ |
|
Usage
|
Use as a wire pulling elbow to facilitate wire pulling through a sharp bend in a run of EMT Pipe Removable cover gives ample access to wiring |
Product Details
Emt Conduit and Fittings
EMT Offset Connector
|
Material
|
Zinc Die Cast |
| Finish | Galvanized |
| Type | Un-insulated |
| Standard | UL514 B |
| Size | 1/2″ 3/4″ 1″ |
|
Usage
|
Use to make a slight adjustment in terminating the end of a run of steel EMT Pipe to an enclosure or box where an offset is required |
Product Details
Emt Conduit and Fittings
EMT Set Screw Service Entrance Cap
Material | Zinc Die Cast |
| Finish | Galvanized |
| Standard | UL514 B |
| Size | 1/2″ 3/4″ 1″ |
Usage | Use to make a slight adjustment in terminating the end of a run of steel EMT Pipe to an enclosure or box where an offset is required |
Product Details
Emt Conduit and Fittings
EMT One Hole Strap,EG
Material | Steel Q195 |
| Finish | Electro-galvanized |
| Cer. | UL E365032 |
| Size | 1/2″ to 2″ |
Usage | Snap-on type EMT strap with one hole Inverted rib for strength |
Product Details
Emt Conduit and Fittings
EMT Two Hole Strap,EG
Material | Steel |
| Finish | Electro-galvanized |
| Standard | UL 2239 |
| Size | 1/2″ to 2″ |
Usage | Use to support EMT Conduit to a mounting surface |
Product Details
Emt Conduit and Fittings
EMT One Hole Strap,Pre-Galvanized
Material | Steel Q195 |
| Finish | Pre-galvanized |
| Cer. | No |
| Size | 1/2″ to 2″ |
Usage | Snap-on type EMT strap with one hole Inverted rib for strength |
Product Details
Emt Conduit and Fittings
EMT Two Hole Strap,PG
|
Material
|
Steel |
| Finish | Pre-galvanized |
| Size | 1/2″ to 2″ |
|
Usage
|
Use to support EMT Conduit to a mounting surface |
Product Details
Emt Conduit and Fittings
EMT Conduit Spacer Bar Saddle
Material | Steel |
| Finish | Electro-galvanized |
| Size | 3/4″ and 1″ |
Usage | Use to support EMT Conduit to a mounting surface |
Product Details
Emt Conduit and Fittings
Zinc Locknut
Material | Zinc |
| Finish | Galvanized |
| Standard | UL514 B |
| Thread | NPSM |
| Size | 1/2″ to 4″ |
Usage | Use on end of threaded connectors to a steel outlet box or metal enclosure |
Product Details
Emt Conduit and Fittings
Stainless Steel Locnut
Material | Stainless Steel |
| Finish | SS304 / SS316 |
| Thread | NPSM |
| Size | 1/2″ to 6″ |
Usage | Use on end of threaded connectors to a steel outlet box or metal enclosure |
Product Details
1/2″ | Stainless Steel |
3/4″ | Stainless Steel |
1″ | Stainless Steel |
1-1/4″ | Stainless Steel |
1-1/2″ | Stainless Steel |
2″ | Stainless Steel |
2-1/2″ | Stainless Steel |
3″ | Stainless Steel |
| 3-1/2″ | Stainless Steel |
| 4″ | Stainless Steel |
| 5″ | Stainless Steel |
6″ | Stainless Steel |
Emt Conduit and Fittings
Knockout Seal
Material | Steel |
| Finish | Pre-galvanized |
| Thread | No |
| Size | 1/2″ to 2″ |
Usage | Designed to cover exposed knock-out holes in steel boxes and other metal enclosures |
Product Details
Emt Conduit and Fittings
EMT Aluminum Conduit Bender
Material | Aluminum |
| Thread | NPSM |
| Size | 1/2″ 3/4″ 1″ |
Product Details
Conduit Bending Basics:
Conduit benders have been designed for performance and durability exceeding the expectations of today’s professional. It is recommended to familiarize yourself with bending concepts, techniques and learn the bender’s functionality to provide you a positive experience whilegreatly improving the overall outcome of your project.
Conduit come in two types, EMT and Rigid conduits and can be found in various sizes.
Prostar provides conduit benders for EMT in ½”, ¾”, 1” and 1-¼” conduit and ½”, ¾”, and 1” Rigid conduit.
To aid bending when performing a ground or air bend, the benders are marked with different alignment
symbols to help the operator create the bends necessary to accomplish any project.
The symbols found on the Prostar benders are the arrow, the teardrop, the star point and angle markings. These markings are found on various sides of the bender head.
Emt Conduit and Fittings
EMT Conduit Bender with Handle
Material | Aluminum |
| Thread | NPSM |
| Size | 1/2″ 3/4″ 1″ |
Product Details
Conduit Bending Basics:
Conduit benders have been designed for performance and durability exceeding the expectations of today’s professional. It is recommended to familiarize yourself with bending concepts, techniques and learn the bender’s functionality to provide you a positive experience whilegreatly improving the overall outcome of your project.
Conduit come in two types, EMT and Rigid conduits and can be found in various sizes.
Prostar provides conduit benders for EMT in ½”, ¾”, 1” and 1-¼” conduit and ½”, ¾”, and 1” Rigid conduit.
To aid bending when performing a ground or air bend, the benders are marked with different alignment
symbols to help the operator create the bends necessary to accomplish any project.
The symbols found on the Prostar benders are the arrow, the teardrop, the star point and angle markings. These markings are found on various sides of the bender head.
Emt Conduit and Fittings
EMT Conduit Bender,Metallic
Material: Ductile Iron
Black Enamel
Size available as below :
| Cat.No. | Conduit Size | |
| EMT | Rigid | |
| SCB-050 | 1/2″ | – |
| SCB-075 | 3/4″ | 1/2″ |
| SCB-100 | 1″ | 3/4″ |
| SCB-125 | 1-1/4″ | 1″ |
Product Details
Conduit Bending Basics:
Conduit benders have been designed for performance and durability exceeding the expectations of today’s professional. It is recommended to familiarize yourself with bending concepts, techniques and learn the bender’s functionality to provide you a positive experience whilegreatly improving the overall outcome of your project.
Conduit come in two types, EMT and Rigid conduits and can be found in various sizes.
Prostar provides conduit benders for EMT in ½”, ¾”, 1” and 1-¼” conduit and ½”, ¾”, and 1” Rigid conduit.
To aid bending when performing a ground or air bend, the benders are marked with different alignment
symbols to help the operator create the bends necessary to accomplish any project.
The symbols found on the Prostar benders are the arrow, the teardrop, the star point and angle markings. These markings are found on various sides of the bender head.
Emt Conduit and Fittings
Grounding Terminal Lug
Material | Aluminum |
| Size | 4-14#,4-1/0# |
| Usage | Used to grounding wiring system |
Product Details
